Description:

Built with ultralight EPO foam, the large wing area, high-winged airframe configuration gives the Trekker low wing-loading and extraordinary amounts of lift, even at slow speeds. The use of the tricycle-geared layout helps to have a better rolling directionality. The main landing gear is made of durable aluminum plates, with large spans on both sides and flat arcs, which can effectively absorb the impact of heavy landing. Furthermore, optional floats add to the all-terrain fun of the Trekker.

Specifications
Wing Area: 25dm (387in)
Wing Loading: 40g/dm(0.08oz/in)
Wingspan: 1200mm (47.2in)
Length: 950mm (37.4in)
CG (Center of Gravity): 50-60mm from the leading edge
Power System: Brushless 3136-KV1200
Electronic Speed Control: 20A XT60
Propeller / EDF: 10 x 5
Servos: 9g servo x 4, 9g 54 degree servo x 1
Landing Gear: Fixed
Required Battery: 11.1V 1300mAh 25C
Required Radio: 6 Channel transmitter and receiver required
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Flaps: No
Material: EPO Foam
Skill Level: Beginner
Build Time: 15 minutes
Gyro: No

RTF (Ready to fly): A RTF plane includes the plane with the radio, receiver, battery, charger, motor, servos, retracts (if it has) and ESC already in place.

PNP (Plug and Play) - A PNP foam plane includes the plane with the motor, servos, retracts (if it has) and ESC already in place. Battery and charger are not included. Radio and receiver are not included.

KIT: A KIT plane is an airframe only. It does not include any motor, ESC, or servos (though usually includes servoless retracts on planes with retracts).