Description:

Hao Han Firfly FPV Drone Specifications

Main Parameters:

Overall Dimensions: 1080690376mm

Material: High-quality light grey EPP, reinforced plastic parts, carbon fiber

Installation Time: 1min

Flight Speed: 10m/s-27.7m/s

Standard takeoff Weight: 1Kg

Cruising Speed: 15.8m/s

Maximum Endurance Time: 60min(4S1P); 90min(4S2P)

Maximum Range: 60km(4S1P); 90km(4S2P)

Wind Resistance Level: Level 5

Maximum Operating Altitude: 4000m

Motor 2216: 1100KV

ESC: 30A

PNP Empty Weight: 750g

SEMI Empty Weight: 800g

Propeller: 1Carbon fiber Propeller

EPP Case Dimensions: 583*453*265mm

Package Dimensions: 600*500*280mm

Servos: 4pcs 13g metal gear servo

Recommended battery: 4S1P 21700 4S2P 21700

Flight Controller Specifications:

MCU: 168MHz STM32F405RGT6

IMU: ICM42688-P (SPI)

Barometer: DPS310 (I2C)

OSD: AT7456E (SPI)

Blackbox: MicroSD slot (SPI)

6x UARTs, 1x Softserial_Tx option (INAV/BF)

11 PWM outputs (8 Dshot compatible with BF/ArduPilot)

1x I2C

4x ADC (VBAT, current, RSSI, airspeed)

1 spare PINIO

3 XT30ESC power outputs

Built-in inverter for SBUS input on UART2-RX

PMU Specifications:

Input: 9-36V (3-8S battery)

PDB: 3x 35A (maximum 3x 50A)

BEC: 5V 1.5A

BEC: 12V 2A

LDO 3.3V: 200mA

Current sensor: 220A, 3.3V analog-to-digital converter (INAV/BF scale 150,ArduPilot 66.7 A/V)

Battery divider 1K:20K (INAV-2100, BF-210, ArduPilot BATT_VOLT_MULT 21.0)

Dimensions: 33 x 55 x 19 millimeters

Weight: 10g

PNPVersion Included:

1FireFly Platform (12216 1100KV motor,1ESC 30A 1Carbon fiber blades 4pcs 13g metal gear servos)

1FireFly EPP Case

2FireFly Nosecone

1Navigation Light Controller
1Thumb Action Camera Mount
1VTX Mounting Fiberglass Plate

SEMIVersion Included:

1FireFly Platform (12216 1100KV motor,1ESC 30A 1Carbon fiber blades 4pcs 13g metal gear servos)

1FireFly EPP Case

2FireFly Nosecone

1Navigation Light Controller

1GPS

1Flight Controller
1VTX Mounting Fiberglass Plate

1Thumb Action Camera Mount

Hao Han Firfly Configuration List

configuration	Firefly PNP	FireFly SEMI	Firefly Classic
Pre-installed Fuselage/Wings/Tail with Quick-Release Components
Front-end and Adapter Components
2216 1100KV Motor
30A ESC
carbon fiber propeller*1
All-Metal Digital Servos*4
Navigation Lights
EPP Carrying Case
User Manual
Intelligent Flight Controller
GPS
4S 4000mAh Power Battery
Three-Axis Mechanical Gimbal
Remote Controller with Built-in Screen and Sky-End Receiver
Charger

Hao Han Firfly Details

Experience flight with Hao Han's FireFly FPV drone, soaring within reach.

Equipped with a C10 Pro three-axis gimbal, features 4K thumb camera, and supports real-time transmission via video transmission system.

Meet the Hao Han Firfly FPV Drone, a high-performance drone featuring an overall dimension of 1080x690x376mm. Constructed from high-quality light grey EPP, reinforced plastic parts, and carbon fiber, this drone boasts impressive specs: installation time under one minute, flight speed ranging from 10m/s to 27.7m/s, standard takeoff weight of 1Kg, cruising speed of 15.8m/s, and an empty weight of 750g. Equipped with a 2216 1100KV PNP motor, 30A SEMI ESC, and carbon fiber propeller, this drone is designed for efficient intelligent flight control and features multiple flight modes, excellent industrial mounts, and a quick-release design.

Experience fast and easy assembly with Hao Han Firfly's modular design, featuring quick-release structures that reduce build time to just 1 minute, letting you take to the skies sooner.

The compact design measures 583x453x265mm, allowing for easy transportation and storage of the Hao Han Firfly FPV Drone.

Quote: The Hao Han Firfly FPV Drone features an aerodynamic design with high-lift airfoil profiles, wing twist, and elliptical lift distribution for efficient flight and superior stall resistance.

Optimized for aerodynamic performance through CFD simulations and wind tunnel testing, the Hao Han Firfly FPV drone achieves a maximum flight time of 100 minutes and range of up to 100 kilometers with a 4S2P 21700 battery.

Experience enhanced reliability and aerodynamics with high-precision metal servos driving control surfaces, while a high-efficiency propulsion system delivers optimal cruise performance.

Introducing the Hao Han Firfly FPV Drone's flight controller, powered by open-source firmware platforms Ardupilot and INAV. It features various autonomous flight modes and supports GPS modules, peripherals, and connectors. Key specifications include a 168MHz STM32F4OSRGT6 MCU, ICM42688-PP IMU, DPS310 barometer, AT7456E OSD, and MicroSD slot for blackbox recording. Other notable features include six UARTs, eleven PWM outputs, four ADC channels, and three XT3OESC power outputs. The controller also boasts a built-in inverter for SBUS input on UART2-RX and PMU specifications include 9-36V input voltage, three 35A PDBs (maximum 50A), 5V/1.5A and 12V/2A BECs, as well as current sensors and analog-to-digital converters.

FireFly features a detachable and replaceable nose that's compatible with official C1OPRO gimbal, three-axis FPV gimbal, thumb action camera, and DJI 03, allowing for quick attachment or detachment with just three screws. It also supports both DJI 03 and analog transmission devices through interchangeable nose components.

Featuring exceptional industrial design, Firefly's aerodynamic shape makes it both a functional aircraft and an artistic masterpiece, boasting intelligent airflow design for thermal management and compatibility with third-party transmission devices.

Equipped with C10 Pro and C20T three-axis gimbals, the Hao Han Firfly FPV drone features a wide 10 to -90 field of view. The gimbal's angle can be adjusted between +10 to -90 for optimal performance. A sturdy nose design safeguards the gimbal while providing a 10 to -900 viewing angle. For smooth landings, the Firfly has friction-enhanced injection footpads on its nose and underside.

Here's the Hao Han Firfly FPV drone's key feature: a lightweight yet incredibly strong frame crafted from carbon fiber and injection-molded components, perfect for extended flights.

Featuring a wing and tail navigation light design with a mesmerizing breathing light effect, reminiscent of a Firefly's gentle glow in the night sky.

Introducing Hao Han's Firfly FPV Drone, featuring a carbon fiber propeller, max takeoff weight of less than 2kg, and 2216 motors with 1100KV H. With overall dimensions of 1080x690x376mm and packaging dimensions of 583x453x265mm, this modular aircraft from Shenzhen HAOHAN Innovation Technology Co., Ltd is perfect for soaring to new heights.

Experience the Hao Han Firfly FPV Drone, featuring a Firefly PNP configuration with a 25mm motor, 2NMJOv4 propellers, and a carbon fiber frame. Includes a FireFly Platform with 2216 motors, ESCs, and servos, as well as an EPP case, nosecones, navigation light controller, thumb action camera mount, VTX mounting plate, and a limited edition personalized number keepsake (available for the first 300 customers).

Firefly Semi drone with 2216 10OKV motor, ESC 30A, and carbon fiber blades. Includes EPP case, nosecone, navigation light controller, thumb action camera mount, GPS, flight controller, VTX mounting fiberglass plate, and limited edition personalized number keepsake (first 300 customers only).